芯片制造流程课件.ppt
- 【下载声明】
1. 本站全部试题类文档,若标题没写含答案,则无答案;标题注明含答案的文档,主观题也可能无答案。请谨慎下单,一旦售出,不予退换。
2. 本站全部PPT文档均不含视频和音频,PPT中出现的音频或视频标识(或文字)仅表示流程,实际无音频或视频文件。请谨慎下单,一旦售出,不予退换。
3. 本页资料《芯片制造流程课件.ppt》由用户(晟晟文业)主动上传,其收益全归该用户。163文库仅提供信息存储空间,仅对该用户上传内容的表现方式做保护处理,对上传内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知163文库(点击联系客服),我们立即给予删除!
4. 请根据预览情况,自愿下载本文。本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
5. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007及以上版本和PDF阅读器,压缩文件请下载最新的WinRAR软件解压。
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 芯片 制造 流程 课件
- 资源描述:
-
1、Chip Manufacturing Overview 芯片制作概述晶柱晶柱Silicon Ingot晶圆晶圆Wafer光罩制作光罩制作/光刻光刻离子植入离子植入切割、封装切割、封装电镀电镀(Die,晶粒)(Chip,晶芯)蚀刻蚀刻Mask Making/PhotolithographyIon ImplantationAssembly&TestingElectroplatingEtching沉积沉积Deposition To make wafers,polycrystalline silicon is melted.The melted silicon is used to grow sili
2、con crystals(or ingots)that are sliced into wafers.首先融化多晶硅,生成晶柱,然后切割成晶圆。Raw Material for Wafers 晶圆制作所需原料To remove the tiniest scratches and impurities,one side of each wafer is polished to a mirror-like surface.Chips are built on this surface.切下的晶圆要经过清洁、磨光等步骤以去除杂质,使平面光滑。Raw Material for Wafers(Contd
3、)晶圆制作所需原料(接上页)A layer of silicon dioxide(SiO2)glass is grown on the wafer by exposing the wafer to oxygen at very high temperatures.A process called chemical vapor deposition(CVD)is then used to coat silicon dioxide onto the wafer surface.Because it will not conduct electricity,this layer is called“
4、dielectric”.Later,channels will be etched or otherwise formed in the dielectric for conducting materials.SiO2 may also be grown or deposited during later steps in the process as layers of the circuit are built onto the chips:制作晶片的第一步是在晶圆上沉积一层不导电的二氧化硅。在晶片的后续制作过程中,二氧化硅层的成长、沉积会进行很多次。在高温下使晶圆曝氧可以使二氧化硅层成长
5、。然后使用化学气相沉积方法使二氧化硅层沉积在晶圆表面。Chip Manufacturing Process Deposition 芯片制作过程 沉积 SMICWhat is microlithography?Microlithography:transfer the pattern of circuitry from a mask to a wafer.Photolithography,or lithography for short,is used to create multiple layers of circuit patterns on a chip.First,the wafer
6、is coated with a light-sensitive chemical called photoresist.Then light is shone through a patterned plate called a mask or reticle to expose the resistmuch the same way film is exposed to light to form a photographic image.下面使用光刻制程在芯片建立多层电路图案。首先,晶圆表面上覆盖上一层感光性强的化学制品光刻胶。象光透过电影底片形成图象一样,光透过光掩膜在晶圆上形成图案。
7、Chip Manufacturing Process Photolithography 芯片制作过程 光刻SMICThe wafers exposure to light in lithography causes portions of the resist to“harden”(or become resistant to certain chemicals).The“non-hardened”resist is washed away.Then the material below it,for example SiO2,is etched away.Finally,the“harden
8、ed”resist is stripped off so that the material underneath forms a three-dimensional pattern on the wafer.The first lithography and etch process will result in a pattern of SiO2.光刻制程后,感光部分的光刻胶具有强的抗腐蚀性,抗腐蚀性弱的光刻胶在接下来的制程里被洗去。接着光刻胶下面的部分被蚀刻制程除去。最后,抗腐蚀性强的光刻胶也被剥离。光刻与蚀刻制程在晶圆表面形成3D的图案。Chip Manufacturing Proce
展开阅读全文